Portable, disposable and self-contained with color-coded, pre-connected hoses. Touch 'n Foam Professional 2-component kits are designed for larger insulating, sealing, patching and filling applications. Available in sizes from 15-600 board feet, Touch ‘n Foam Professional Foam Systems provide a quick consistent flow of foam that dries in under a minute and expands 30X.

Touch ‘n Foam Pro Cylinders offer fast expansion and quick curing in a single portable, disposable unit.  Complete with a pre-attached hose and applicator wand, cylinders offer controlled linear dispensing for larger projects.

System 200 & 600 Two-Component System Specifications:

• Density (ASTM D-1622): 1.75 +/- .02 pcf
• K-Factor (ASTM C-518): 0.14 BTU • in • hr-1 • ft-1 • f-1
• R-Value (ASTM C-518): 7.12/inch
• Compressive Strength (ASTM D- 1621):
            10% parallel: 19 psi
            10% perpendicular: 13.4 psi
• Tensile Strength (ASTM D-2126): 30 psi
• Dimensional Stability (ASTM D-2126):
            –40ºF, 2 weeks: +.88% volume change
            158ºF, 100% RH, 2 weeks: +14% volume change
• Water Absorption (ASTM D-2842): 1.0-3.5% vol.
• Closed Cell Content (ASTM D-2856): 90% minimum
• Maximum Service Temperature for Cured Foam: 240ºF (116ºC)
• Shelf Life: 18 months
• Use all contents within 30 days of initial dispensing

Cylinder Quick Cure Foam MSDS

Pro Cylinder Quick Cure Foam Data Sheet

Two-Component Foam Kits MSDS Part A
Two-Component Foam Kits MSDS Part B